Skip to main content

Antiscalant RO

Reverse Osmosis (RO) Chemicals
Product Code / SKU:  RXSOL-33-3302-025

This is a reverse osmosis membrane treatment chemicals . It is highly concentrated polymer chemicals.

Prompt industrial dispatch Bulk & custom packaging (20L, 25L, 210L, IBC) Certificate of Analysis (COA) & MSDS available

Product Overview

Antiscalant for the protection of RO MEMBRANE. This is a reverse osmosis membrane treatment chemicals. It is highly concentrated polymer chemicals. Antiscalant Manufacturer, supplier and Exporter.  

Technical Specifications

Our RO Antiscalant  is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. 

In case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium. 

At about 10-15ppm dosage our RO Antiscalant (HIGH PH) is capable of fully inhibiting iron and calcium, and silica up to 166ppm. For higher silica content RXSOL ANTISCALANT should be used. 

Antiscalant RO                                   RXSOL-33-3302-025
Antiscalant C.I ALKA                          RXSOL-33-2034-025
Membrane Antiscalant ALKA 191T    RXSOL-33-3321-030 
Antiscalant ORG EV 2030                 RXSOL-33-3325-230
Antiscalant RXSOL ORG EV             RXSOL-33-3327

Performance:

This product offers a variety of critical performance and application benefits: Inhibits RO membrane scaling caused by the following:

Calcium Carbonate:  CaCO3
Calcium Sulfate: CaSO4
Barium Sulfate: BaSO4
Strontium Sulfate: SrSO4
Calcium Fluoride: CaF2

Application & Dosage

Application Instructions


Recommended Dosage


Available Packaging & Quantities

Dosing Guidelines: 

The typical dosage range is between 2 to 5 ppm or Typical dosage range is between 2 and 6 mg/L.

Dilution:

This product is formulated to be injected neat. However, if a dilution is required, use demineralized or RO permeate water. If neither of these is available, softened water may be substituted. The dilution for Vitec 1000 should not result in a solution strength of less than 10%. This guidelin will protect the effectiveness of the internal bacteriostat which inhibits bacterial growth in the drum and feed tank.Maximum dilution is temperature related as shown below.
Temperature, °C     Maximum Dilution, %
<30                                        12
30-35                                     25
>35                                        50

Handling, Storage & Safety

90-92

Packaging and Storage:

Standard regional pack sizes are listed below and custom packaging can be provided worldwide. This product should be protected from freezing.

Specifications
Appearance: Yellow liquid
pH (10% solution): 2.9

Specific Gravity@20oC

1.67 - 1.2

Packing 30 Kgs, 230 Kgs drum.

Antiscalant  RO manufacturer and supplier Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Surat, Fujairah, Dubai, Sharjah, Abudhabi, Oman, Muscat Barka, Sohar Ruwi, Sudan, Yemen, Nairobi KENYA, Gujrat Vizag Ennore, Haldia, Paradip

Target Industries & Supply Locations

Useful Applications

Antiscalant for the protection of RO MEMBRANE. This is a reverse osmosis membrane treatment chemicals. It is highly concentrated polymer based chemicals. Antiscalant Manufacturer, supplier and Exporter.

Supply & Distribution Locations

This is a reverse osmosis membrane treatment chemicals . It is highly concentrated polymer chemicals. Antiscalant chemicals generally known as reverse osmosis membrane treatment chemicals are prepared with SHMP (Sodium Hexa Meta Potassium), HEDP and dilution of water as per required. The quality of antiscalant chemicals depends on its concentration and the density of polymer used to prepare antiscalant chemicals.

Need pricing or a bulk quotation?

Tell us your required product and quantity — our technical sales team replies promptly with pricing and availability.

Request a Quote