RXSOL-41-8668-025Free flowing white solid crystalline powder. Anhydrous Citric Acid is slightly hydroscopic and should be stored under conditions of low temperature and low humidity
Product Overview
Technical Specifications
CITRIC ACID CR20A
Application & Dosage
Application Instructions
Recommended Dosage
|
Product Name |
: Citric Acid Anhydrous |
Molecular Formula |
: C₆H₈O₇ |
|
Part Number |
: RXSOL-41-8668-025 |
CAS Number |
: 77-92-9 |
|
Batch Number |
: 202107021551 |
Mess |
: 30 – 100 Mesh |
|
NOT FOR MEDICINE USE |
|||
| Test | Unit | Specification | Analysis Result |
| Characters | -- | White Crystalline Powders,Colorless Crystals or Granules.Odorless, has a strongly acid taste. Very Soluble in water, freely soluble in ethanol | Pass |
| Identification | -- | Pass | |
| pH (10% Solution) | -- | 1 -2 | Pass |
| Taste | -- | Strong Acid Taste | Pass |
| Solubility | -- | 1 g soluble in 0.5 ml water, in about 2 ml of ethanol,partially soluble in about 30 ml of ether | Pass |
|
Color & Clarity of Solution |
% | Clear Solution | Pass |
| Appearance of solution | -- | Pass Test | Pass |
| Assay | % | 99.5-100.5 | 99.90 |
| Moisture | % | ≤ 0.5 | ≤ 0.1 |
| Readily Carbonisable Substances | -- | ≤ 0.52 | ≤ 0.5 |
| Sulphated Ash | % | ≤ 0.05 | 0.02 |
| Iron | mg/kg | ≤ 5 | Pass |
| Aluminium | mg/kg | ≤ 0.2 | < 0.2 |
| Calcium | mg/kg | ≤ 25 | Pass |
| Chloride | mg/kg | ≤ 5 | Pass |
| Water insouble Matter | mg/kg | ≤ 30 | < 30 |
| Sulfate | mg/kg | ≤ 150 | < 150 |
| Oxalate | mg/kg | ≤ 100 | < 100 |
| Lead | mg/kg | ≤ 0.5 | < 0.5 |
| Arsenic | mg/kg | ≤ 1 | < 1 |
| Mercury | mg/kg | ≤ 1 | < 1 |
| Heavy Metal | mg/kg | ≤ 10 | < 10 |
| Bacterial organic impurities | IU/mg | < 0.5 | < 0.5 |
Available Packaging & Quantities
CITRIC ACID is a source of hydrogen ions (H+) used to reduce the pH of a drilling fluid. Both liquid and powdered.
Benefits
CITRIC ACID is primarily used to quickly reduce the pH in drilling fluid. One of the benefits of using Citric Acid is that it forms Sodium Citrate in the presence of Sodium based polymers such as DMA and OMNIPOL II. Sodium Citrate acts as a dispersant in water based fluids, helping to control the rheology. A third benefit of CITRIC ACID is the reduced hazard to personnel when compared to other acids normally used in drilling applications. CITRIC ACID will not reduce hardness levels in drilling fluids as will phosphoric acid.
Treatment
CITRIC ACID is added through the hopper when using the dry material, and added directly to the drilling fluid when using the liquid. A diaphragm-metering pump may be utilized with the liquid for continuous pH control.
Treatment levels vary with the concentration of salts, particularly hydrogen (H+) and hydroxide (OH- ).
Function
CITRIC ACID provides a layer of hydrogen ions around active clays, reducing their zeta potential and thus reducing their ability to imbibe water. This function translates to fewer solids, less swelling of the solids in the drilling fluid, reduced wellbore swelling, and more efficient solids control equipment function. A secondary benefit of CITRIC ACID is the formation of sodium citrate, a thinner. This helps counteract the flocculating influence of the hydrogen ions on first being introduced to the drilling fluid system.
Handling, Storage & Safety
Citric Acid exporter and supplier in Muscat Oman, Al Qusais, Deira, Saif Zone, Fujairah, Sharjah, Dubai, Abudhabi, Ajman, Diera, UAE Middle East, Al Quoz, Jebel Ali, Umm Al Quawain, Ras Al Khaimah, Masafi, Khor Fakkan, Al Hayl, Al Ain, Ras Al Khor Industrial Area, Al khubaisi, Um Ramool Industrial Area, Al Qusais Industrial Area, Jebel Ali
We are also popular citirc acid supplier in India in Mumbai, Navi Mumbai MIDC, Taloja, Gandhidham, Chennai, Visakhapatnam, Kolkata, Howrah
Target Industries & Supply Locations
Useful Applications
CITRIC ACID is a source of hydrogen ions (H+) used to reduce the pH of a drilling fluid. Both liquid and powdered. CITRIC ACID provides a layer of hydrogen ions around active clays, reducing their zeta potential and thus reducing their ability to imbibe water. This function translates to fewer solids, less swelling of the solids in the drilling fluid, reduced wellbore swelling, and more efficient solids control equipment function. A secondary benefit of CITRIC ACID is the formation of sodium citrate, a thinner. This helps counteract the flocculating influence of the hydrogen ions on first being introduced to the drilling fluid system.
Application – Pipe cleaning in Aircraft
Supply & Distribution Locations
Typical Physical Properties
Physical Appearance………White powder or clear liquid
Specific Gravity………...…..1.542
Bulk Density…………...……63 lb/ft³
Hygroscopic…………………slightly
pH in water………………….1.87
Need pricing or a bulk quotation?
Tell us your required product and quantity — our technical sales team replies promptly with pricing and availability.