Condensnol Amine 20 Ltrs
RXSOL-50-5005-020LIQUID CONDENSATE CORROSION CONTROL FOR BOILER SYSTEMS
Product Overview
Technical Specifications
We are also keeping ready stock of full range of marine chemicals, Some of valuable marine products are as follows :::
ALKAATUFF Ship Hold Cleaner
CHLORINATED ISOCYANURATE TABLETS
CHLORINE Liquid
Oil Spill Dispersant
DESCALING CHEMICAL
ELECTROSOLV E
Enviro Degreaser
PERMANGANATE TABLETS
NITRITE BORAX CORROSION INHIBITOR LIQUID
Application & Dosage
Application Instructions
RXSOL-50-5005-20 condensate is tested for PH to determine the dosage level. The PH limits are 8.3 - 9.0 . For an average system e. g. 10 M3, the dosage is approximately 0.65 ltr / day .
The necessary amount of RXSOL-50-5005-20 is required or injected as frequently as to maintain the pH of the condensate at the main condensate pump outlet between 8.6-9.5 . The amines pass over with the steam and have the dual function of elevating the pH of the steam/condensate and putting a protective micro film on the system pipe work. Acidic condensate is the result of carbonic acid (H2CO3) being formed as CO2 is released in the steam.Condensate prevents corrosion by carbonic acid on live systems. Its filming properties also reduce corrosion on shut down lines, when moisture and oxygen are present.
Recommended Dosage
- Easy to use liquid treatment.
- Neutralizes the acids occurring in the condensate system.
- Less maintenance required. Lower operating costs and increased reliability.
- Volatilizes and carries over with the steam and so is recycled. Dosage is economical and efficient.
- Simple test to determine level of treatment.
- Used for protection of condensate and feed water systems in boiler systems of all pressures.
Handling, Storage & Safety
We carry a complete line of condensate treatment chemicals. Condensate treatment chemicals are used to increase the condensate pH, thus reducing corrosion to the entire boiler steam system. The most common product is a tri-blend amine of cyclohexylamine, morpholine, and diethylaminoethanol (DEAE) neutralizing amines, although we do have standard RXSOL products or we can custom blend to your needs.
RXSOL-50-5005-DCM1 10% DEAE, 10% Cyclo, 10% Morpholine
RXSOL-50-5005-DCM2 20% DEAE, 20% Cyclo, 20% Morpholine
RXSOL-50-5005-C 20% Cyclohexylamine
RXSOL-50-5005-D 20% DEAE
RXSOL-50-5005-M 20% Morpholine
RXSOL-50-5005-C5 50% Cyclohexylamine
RXSOL-50-5005-D 50% DEAE
RXSOL-50-5005-M5 50% Morpholine
Target Industries & Supply Locations
Useful Applications
VapourTreatment (For controlling of Scale & Foam) ::: Neutral Liquid for prevention of scale in seawater Evaporators
This is a highly active antifoulant, water scale inhibitor, dispersant and anti-precipitant compound for use in industrial and marine water systems, such as cooking systems, heat exchangers, air conditioning equipment, etc.
RXSOL-51-6001-025 is a concentrated solution of a POLYELECTROLYTE polymer and antifoaming agents for use in SEA WATER evaporator as a controller of scale and foam in side the evaporators. It can be used as a scale inhibitor in the feed water to EVAPORATORS producing fresh water .
A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators
Procedure Of Use and Dose Rates: POLYELECTROLYTE polymer of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and easily removed from the evaporator line. Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR. And by that way Distilled water quality is maintained in side the EVAPORATOR.
Used in both high and low pressure evaporators.
Dosage :
| Daily Out Put Evaporator | Daily RXSOL VT 6001 Requirement |
| 10 -20 MT | 100-200 ML |
| 30-40 MT | 300-400 ML |
| 50-60 MT | 500-600 |
Setting the Flow Rate: The treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting i.eThis will last 24 hours.
Note: We can remove existing mineral scale deposits by using A 5-10% solution of RXSOL-51-6001-025 Otherwise to save money and cleaning of HARD DEPOSITS which is formed due to not proper treratment of Evaporator, we have specialized Safe Scale Remover with Indicator ( Product code is RXSOL-22-2210-200 ).
| CharactersItics | Properties | |
| Appearance Thermal Firmness | Clear yellow liquid 250° C | By keeping heat transfer surfaces free of scale, Ensures that the evaporator works at maximum efficiency. |
| Density | In g/cm3 at 15°C: 1.1 |
Permits more efficient evaporation. |
| pH (1 Vol%) | 9 |
Reduces downtime and maintenance costs. |
| Compatibility | Concentrated, safe liquid, easy and economical dosing. | |
| Metal | No known effect |
For use in both high pressure and vacuum evaporators |
| Rubber | No known effect | The antifoaming properties ensure that distillate quality is high |
| Packaging |
20 / 25 ltr |
Improves the quality of distilled water |
Supply & Distribution Locations
RXSOL-50-5005-20 Concentrated liquid neutralising agent for corrosion control in condensate and feed water systems, contain blends of low, medium and high volatility amines that provide great protection and neutralization of acidic gases, such as CO2 throughout a condensate system. Protects boiler surfaces by forming an iron tannate film.
Need pricing or a bulk quotation?
Tell us your required product and quantity — our technical sales team replies promptly with pricing and availability.