Get In Touch
Home / Products / Automobiles / Coolant Premix Redcool

Coolant Premix Redcool

Automobiles
Product Code / SKU:  RXSOL-40-4043-025

Premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports) helps to i

Request a Quote Technical Inquiry
Prompt industrial dispatch Bulk & custom packaging (20L, 25L, 210L, IBC) Certificate of Analysis (COA) & MSDS available

Product Overview

RXSOL REDCOOL  is an ALL YEAR ROUND automotive cooling system treatment, designed to provide complete cooling system protection.Modern engine cooling systems are designed with the fluid characteristics of glycol based coolants in mind. RXSOL REDCOOL is a complete full fill requirement and it’s ready to use - simply pour.  RXSOL REDCOOL is a glycol premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports) helps to increase component life. A concentration of at least 30% glycol is required to obtain a significant improvement in cavitation performance. Motor manufacturers normally use a minimum of 33% glycol coolant in new vehicles to achieve satisfactory engine cooling system protection.RXSOL REDCOOL is premixed to more  glycol concentration. RXSOL REDCOOL will raise the boiling point and lower the freezing point of the engine coolant. The benefits impart a resistance to the engine coolant boiling in summer and freezing in winter. RXSOL REDCOOL incorporates additives to guard against corrosion of cast iron, steel, brass, solder, copper and aluminium alloys used for engine and radiator components.

Technical Specifications

Frequently Asked Questions

Q1. Why does RXSOL Coolant contain a RXSOL OxyShield Scavenger?

Answer: RXSOL Coolant contains a specialized oxygen scavenger to remove dissolved oxygen from the cooling system. Dissolved oxygen is one of the primary causes of internal corrosion in metal components such as copper, steel, and aluminum. By neutralizing free oxygen, the oxygen scavenger helps prevent rust formation, pitting, and oxidative degradation, ensuring longer equipment life, stable thermal performance, and reduced maintenance costs.
 
Q2. Why is a special compatible corrosion inhibitor added to RXSOL Coolant?
 
Answer: The corrosion inhibitor forms a protective molecular film on the internal surfaces of pipes, heat exchangers, cold plates, and metal components. This barrier prevents direct contact between the metal and corrosive elements such as water, oxygen, and dissolved salts. As a result, the coolant minimizes scale formation, galvanic corrosion between dissimilar metals, and material degradation, helping maintain efficient heat transfer and extending the operational lifespan of the cooling system. Not all inhibitors work in coolants and some may even cause further corrosion. Our experts have studied and formulated special corrosion inhibitors for coolants.
 
Q3. What is the role of RXSOL Color-Indicator in RXSOL Coolant?
 
Answer: The special color-indicators in RXSOL Coolant acts as a visual performance indicator. It helps operators quickly identify leaks, contamination, or dilution within the system. Over time, a noticeable change in color can signal that the coolant’s protective additives have been depleted or that the fluid has become contaminated. This allows for timely replacement or maintenance before system performance or equipment safety is compromised.

Application & Dosage

Application Instructions


Recommended Dosage


Available Packaging & Quantities

Drain and flush previous fluid according to the instructions provided by the vehicle manufacturer. For best results set heater controls to “HEAT” whilst this is carried out.

To remove traces of old fluid, flush the system with clean water.Remove drain plug or bottom radiator hose as appropriate. Hoses other than the bottom radiator hose may need to be removed to ensure all the old coolant is removed..

RXSOL REDCOOL can be used as either a top-up or complete fill without the danger of diluting coolant concentrations. DO NOT ADD WATER to the cooling system when refilling, only add RXSOL REDCOOL .

RXSOL REDCOOL  provides effective corrosion and freezing point protection to -210C. Start and run engine for 5 minutes to circulate the fluid. Check for leaks and top-up system with RXSOL REDCOOL  if required. For maximum system protection, replace RXSOL REDCOOL  at least every three years or 60,000 km

Handling, Storage & Safety

Coolant Premix Redcool manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Coolant Premix Redcool at a competitive price from us. We have ready stock of Coolant Premix Redcool in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Target Industries & Supply Locations

Useful Applications

RXSOL REDCOOL  is an ALL YEAR ROUND automotive cooling system treatment, designed to provide complete cooling system protection. Modern engine cooling systems are designed with the fluid characteristics of glycol based coolants in mind. RXSOL REDCOOL is a complete full fill requirement and it’s ready to use - simply pour. 

RXSOL REDCOOL is a glycol premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports) helps to increase component life. A concentration of at least 30% glycol is required to obtain a significant improvement in cavitation performance. Motor manufacturers normally use a minimum of 33% glycol coolant in new vehicles to achieve satisfactory engine cooling system protection. RXSOL REDCOOL is premixed to more  glycol concentration.

RXSOL REDCOOL will raise the boiling point and lower the freezing point of the engine coolant. The benefits impart a resistance to the engine coolant boiling in summer and freezing in winter.

RXSOL REDCOOL incorporates additives to guard against corrosion of cast iron, steel, brass, solder, copper and aluminium alloys used for engine and radiator components.

Supply & Distribution Locations

RXSOL REDCOOL is a glycol premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports) helps to increase component life.

Need pricing or a bulk quotation?

Tell us your required product and quantity — our technical sales team replies promptly with pricing and availability.

Request a Quote