Key Features & Benefits

• Effective removal of calcium carbonate and common mineral scale deposits.

• Helps dissolve hard water scale and seawater-related encrustations.

• Suitable for marine and industrial water system maintenance.

• Helps restore water flow through scaled pipelines and equipment.

• Improves heat-transfer performance where mineral deposits cause fouling.

• Reduces the need for extensive mechanical descaling.

• Suitable for controlled circulation and immersion cleaning.

• Useful for preventive and corrective maintenance programmes.

• Can assist in cleaning difficult-to-access internal passages.

• Supports maintenance of marine cooling and water circulation systems.

Major Applications

Marine Seawater Cooling Systems

Used for removing mineral deposits from compatible seawater cooling circuits, pipelines and cooling equipment.

Heat Exchangers

Helps dissolve scale deposits on compatible heat-transfer surfaces, improving thermal performance where fouling has reduced efficiency.

Marine Condensers

Suitable for controlled descaling of compatible condenser tubes and associated water passages.

Seawater Pipelines

Assists in removing mineral encrustations and scale deposits that restrict internal flow.

Pumps and Valves

Can be used to clean compatible dismantled components affected by hard water scale and mineral accumulation.

Freshwater Generators and Evaporators

Suitable for selected descaling applications, subject to equipment manufacturer recommendations and material compatibility.

Industrial Water Systems

Used in compatible cooling circuits, process water pipelines and industrial equipment affected by mineral scale.

Safety & Handling

• Read the latest product Safety Data Sheet before use.

• Wear suitable chemical-resistant gloves, goggles and protective clothing.

• Avoid skin and eye contact.

• Provide adequate ventilation.

• Do not mix with chlorine-containing chemicals, hypochlorite or other cleaning agents.

• Use compatible pumps, hoses, tanks and dosing equipment.

• Monitor the cleaning process to avoid excessive metal exposure.

• Collect and dispose of spent cleaning solutions in accordance with applicable regulations.

If the product contains acid, additional precautions may be required for corrosivity, hydrogen generation with reactive metals and carbon dioxide release during carbonate scale dissolution.

Storage

Store in the original tightly closed container in a cool, dry, well-ventilated area.

Protect from direct sunlight, excessive heat and incompatible chemicals.

Keep containers properly labelled and use suitable secondary containment.

Packing

Product Name: Marine Water Scale Remover Product Code: RXSOL-25-1747-025 Packing Size: 25 Litres

Other bulk packing arrangements may be considered subject to availability.

This safe and simple solution effectively dissolves rock-like scale deposits that contaminate your water-cooled marine equipment. LIME Marine is used at ambient temperature and then circulated to bring the solution in contact with the accumulated minerals. The reaction results in a slight foaming or bubbling action, indicating the deposits are actually dissolving into solution, and then simply water flush away! These scale deposits, along with zebra mussels and tiger shells, damage your equipment and reduce your water system performance. Historically, these problems have been addressed via harsh acids, mechanical methods, ion exchange, polyphosphates, permanent magnets and electronic conditioning. If your vessel is heat exchanger cooled, keel cooled, or radiator cooled, try LIME Marine and ride the waves with maintenance superiority.

Directions for Use

A. Circulation Cleaning Method

Recommended for compatible heat exchangers, seawater pipelines, condensers and closed water circuits.

1. Shut down and isolate the equipment to be cleaned.

2. Drain the system and remove loose debris where practical.

3. Inspect the system materials and confirm chemical compatibility.

4. Prepare the descaling solution at the concentration specified in the product TDS.

5. Circulate the solution through the scaled system using a suitable chemical-resistant pump.

6. Monitor scale dissolution, solution condition and relevant process parameters.

7. Continue circulation until the required cleaning endpoint is achieved.

8. Drain and collect the spent cleaning solution.

9. Rinse thoroughly with clean water until the required post-cleaning conditions are achieved.

10. Neutralize or passivate the system where required by the equipment maintenance procedure.

Important: If the formulation is acid-based, monitor gas evolution and avoid operating the cleaning circuit as a sealed, unvented system.

B. Immersion Cleaning Method

Suitable for compatible dismantled components.

1. Place the components in a chemically resistant cleaning tank.

2. Prepare the descaling solution according to the approved TDS.

3. Immerse the components in the solution.

4. Allow sufficient contact time for scale dissolution.

5. Inspect periodically and remove loosened deposits where necessary.

6. Remove the components and rinse thoroughly with clean water.

7. Dry and protect the cleaned components as required.

C. Manual Cleaning Method

For accessible compatible surfaces, apply the product using an approved chemical-resistant applicator.

Allow controlled contact with the scale deposit, then rinse thoroughly. Avoid allowing concentrated chemical to remain on sensitive surfaces.

LIME Marine should be used as directed and at any temperature within the operating limits between 0°F / -18°C and 180°F / 82°C. If the solution does freeze, slush or thicken at the lower operating temperatures, and then thaws, there will be no performance reducing results. Please consult the manufacturer when temperatures above 180°F are encountered.
RXLYME Marine should be applied at ambient temperatures with no heating required. The solution is exothermic, but does not develop a substantial increase in temperature while dissolving water scale, rust, mussels, barnacles, zebra mussels, tiger shells and other water formed deposits.