Get In Touch
Home / Products / Reverse Osmosis (RO) Chemicals / Antiscalant Antifoulant Corrosion Inhibitor 704

Antiscalant Antifoulant Corrosion Inhibitor 704

Reverse Osmosis (RO) Chemicals
Product Code / SKU:  RXSOL-33-3337-025

Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems

Request a Quote Technical Inquiry
Prompt industrial dispatch Bulk & custom packaging (20L, 25L, 210L, IBC) Certificate of Analysis (COA) & MSDS available

Product Overview

Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid antiscalant / antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.

Technical Specifications

Highly effective over a wide-range of waters – for calcium-based and sulfate-based scales, notably, barium sulfate.

Application & Dosage

Application Instructions

Features & Benefits

  • Excellent results as a replacement for softenerfilters
  • Compatible with coagulants
  • Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
  • Compatible with all of the leading RO membranes
  •  Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
  • Effective over a wide pH range
  • May be fed neat or diluted
  • Compatible with feedwaters that contain aluminum and iron oxides

Handling : 
 
Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage  : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Recommended Dosage

Highly effective at low application costs for
seawater, brackish water, and water reuse
applications
• Effectively controls scale including calcium
carbonate, calcium sulfate and barium sulfate
• Excellent results as a replacement for acid dosing
• Reduces the operating costs by increasing
membrane life and reducing membrane cleaning
frequency.
• Effective over a wide pH range
• May be fed neat or diluted
• Certified for use in producing potable water.
(Certified to NSF/ANSI Standard 60)
• Coagulant compatible and can be used with any
SoliSep* MPT series product
description and use
Hypersperse MDC704i is a highly effective and safe
liquid antiscalant/antifoulant developed to control
scale precipitates and reduce particulate fouling within
membrane separation systems.
Use of this product provides longer run times and
extended element life, resulting in reduced operating
and capital costs. The product has shown excellent
results in membrane separation processes including
RO, NF and EDR.
application
For maximum effectiveness, Hypersperse MDC704i
should be added upstream of the static mixer or 
cartridge filter housing.
dosing
Typical dosage range is between 1.5 and 5 mg/L. For
potable applications, the maximum dosage is 12 mg/L. 
 
To determine the adequate dose rate for a certain
system it is recommended to use the new Argo
Analyzer 4.1 simulation software. It will provide the
best application dosage linked to the specific water
chemistry and system design.
Please contact your local SUEZ representative to
define the optimal feed point and dosage rate.
Dilution Guidelines: On-site dilution of Hypersperse
MDC70i4 is possible; however, product dilution to
concentrations below 20% is generally not
recommended. When diluting, use high quality water
such as permeate or deionized water. When feeding
diluted product, examine the make-down tank for
evidence of microbiological (MB) growth. If MB
growth is observed, sanitize the tank and reduce the
batch size. For best results, Hypersperse MDC704i
should be fed neat.
Maximum Dilutions

Maximum dilution is temperature related as shown
below.
Temperature Maximum Dilution, %
<30°C (86°F)        20
30-35°C (86-95°F)   35
>35°C (95°F)        70

Available Packaging & Quantities

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

Temperature  Maximum Dilution %
<30°C 10
30 – 35°C 25
>35°C 50

Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions

Handling, Storage & Safety

81-85

Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada

Target Industries & Supply Locations

Useful Applications

Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid antiscalant / antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.

Supply & Distribution Locations

Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid antiscalant/ antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems.

Need pricing or a bulk quotation?

Tell us your required product and quantity — our technical sales team replies promptly with pricing and availability.

Request a Quote