Lime Remover is one of popular product to clean LIME from ship hold surface. Principally Lime Remover is based on neutralization of alkaline effect of lime which is resulting poor bonding and finally transform into loose sludge form. After end of chemicals reaction loose sludge can be flush with pressure water from ship hold surface.

Lime Remover HD must be used according to the hold surface area that is to be covered, the extent of contamination, the available downtime and the application method being used. Lime Remover HD is covering 10-12 Squire Meter area.

Using Procedure

I - Spray Method

Spray Method is applicable where a high–pressure machine, suitable to process chemical solutions, is used with a 50% Lime Remover HD/water solution to inject directly onto the surface area. Then, the solution must be left to act for 15 minutes followed by thorough rinsing using a high–pressure water supply source. After , the surface must be left to dry. The percentage  of dilutions may vary depending on the thickness and hardness of the deposited lime.

II – Soaking Method

Soaking is a method where Lime Remover HD is used undiluted and applied with conventional methods such as an elongated thick and hard brush, a hard sponge etc. Once applied, Lime Remover HD must be left to soak for 30 minutes. Rinse with water, and followed by leaving the surface to dry. Usually, this method is applicable to heavily contaminated small and large tank surface areas and installations.

Lime Remover supplier in Tuticorin, Ennore, Chennai, Visakhapatnam, Gangavaram, Kolkata, Haldia, pirpav, Mumbai, Goa, Manglore, Surat - Hazira, Kandla, Mundra, Gandhidham, Navlakhi, Fujairah, Dubai.

Useful Applications

Supply & Distribution Locations