INSTRUCTIONS FOR USE

Injecting

Best results are achieved when RO Antiscalant Aquatec 3000  is injected downstream of multimedia filters and upstream of cartridge filters.
Dosing

A typical RO Antiscalant Aquatec 3000  dose ranges from 2-5 mg/l. A site-specific dose can be determined using the technical software program.

Dilution
RO Antiscalant Aquatec 3000  is formulated to be injected neat. However, if dilution is required, use deionized (DI) water or RO permeate. If neither of these is available, softened water may be substituted. The dilution for RO Antiscalant Aquatec 3000 should not result in a solution strength of less than 1%, and DI-quality water must be used for any dilutions below 10%. This guideline protects the effectiveness of the internal bacteriostat, which inhibits bacterial growth in the product packaging and feed tank.

Future , Performence and Benefit ::

Powerful against these and other types of scale:

• Formulated with a crystal modification property that distorts inorganic salt crystal growth to reduce system fouling.
• Compatible with polyelectrolyte coagulants.
• Economical to use, offering threshold scale inhibition at low dose rates.
• Highly effective in a wide variety of feedwaters and pH ranges.