Get In Touch
Home / Products / Evaporator Treatment Chemicals / Vapor Treatment

Vapor Treatment

Evaporator Treatment Chemicals
Product Code / SKU:  RXSOL-51-6001-025

Neutral Liquid for prevention of scale in seawater Evaporators

Request a Quote Technical Inquiry
Prompt industrial dispatch Bulk & custom packaging (20L, 25L, 210L, IBC) Certificate of Analysis (COA) & MSDS available

Product Overview

VapourTreatment  (For controlling of Scale & Foam) ::: Neutral Liquid for prevention of scale in seawater Evaporators This is a highly active antifoulant, water scale inhibitor, dispersant and anti-precipitant compound for use in industrial and marine water systems, such as cooking systems, heat exchangers, air conditioning equipment, etc. RXSOL-51-6001-025 is a concentrated  solution of a POLYELECTROLYTE  polymer and antifoaming agents for  use in SEA WATER evaporator  as a controller of scale and foam in side the  evaporators.  It can be used as a scale inhibitor  in the  feed water  to EVAPORATORS producing fresh water . A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators  

Technical Specifications

CharactersItics   Properties
Appearance Thermal Firmness Clear  yellow liquid 250° C            By keeping heat transfer surfaces free of scale, Ensures that the evaporator works at maximum efficiency.
Density In g/cm3 at 15°C: 1.1

Permits more efficient evaporation.

pH (1 Vol%) 9

Reduces downtime and maintenance costs.

Compatibility   Concentrated, safe liquid, easy and economical dosing.
Metal No known effect

For use in both high pressure and vacuum evaporators

Rubber No known effect The antifoaming properties ensure that distillate quality is high
Packaging

20 / 25 ltr

Improves the quality of distilled water

Application & Dosage

Application Instructions

Procedure Of Use and Dose Rates: POLYELECTROLYTE  polymer  of RXSOL-51-6001-025 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and  easily removed  from  the evaporator  line. Finally RXSOL-51-6001-025 also have defoaming properties by which will stop foaming in EVAPORATOR. And by that way Distilled water quality is maintained in side the EVAPORATOR.

Used in both high and low pressure evaporators. 

Recommended Dosage

Dosage :

Daily Out Put Evaporator Daily  RXSOL VT 6001 Requirement
10 -20 MT 100-200 ML
30-40 MT 300-400 ML
50-60 MT 500-600



Setting the Flow Rate: The treatment is added to the dosage tank and mixed with water. Example: With the 0.5 litres of Vaptreat add sufficient water to make up 50 litres of liquid.The standard flow meter is Adjustable-Rate=0-l00ml/minute.Flow rate calculation: Flowrate = 50 Litres/24 x 60= 35 ml/min setting  i.eThis will last 24 hours.

Note: We can remove  existing  mineral scale deposits  by using  A  5-10%  solution of  RXSOL-51-6001-025 Otherwise to save money and cleaning of HARD DEPOSITS which is formed due to not proper treratment of Evaporator, we have specialized Safe Scale Remover with Indicator ( Product code is RXSOL-22-2210-200 ).

Handling, Storage & Safety

Evaporator Treatment Chemicals to protect deposition of SCALE in fresh water generator. RXSOL Vapor Treatment  is effective and concentrated ANTI-SCALE for water generator system. Improves the quality of distilled water. 

RXSOL  Evaporator Treatment is a liquid combination of active polymer and antifoam used to prevent scale deposition in high and low-pressure Evaporators. A liquid mixture of active polymer and antifoam. 

Target Industries & Supply Locations

Useful Applications

Why Evaporator Treatment Chemicals must use?

PREVENTION OF SCALING IN SEA WATER EVAPORATORS.
RXSOL Vapor Treatment Prevents scale formation at temperatures up to 160°C Also Reduces foaming and maintains optimum plant performance.
 

During distilled water production in seawater evaporators, SCALE CONTROL is very important to increase efficiency of distillation as the seawater contains large quantities of salt which is resulting SCALE FORMATION in heat transfer surfaces.  Scale deposits Not only lower plant efficiency by resisting the transfer of heat, But also damaging instruments. Routine use of RXSOL Vapor Treatment prevents Scale formation in the Evaporator SYSTEM.

Whats the Dose Ratio of RXSOL VAPOR TREATMENT Chemicals?

Dilute the RXSOL VAPOR TREATMENT chemicals with water and continuously inject via evaporator inlet or the salt water supply lineand dose into the evaporator system. 30 ml Dose per ton of Seawater is recommended for the prevention of scaling in seawater evaporators. Dose can vary  depends on the capacity and the operating conditions of the evaporator.


RXSOL-51-6001-025 is identified as VAPTREAT / Vapor Treatment, a specialized evaporator treatment chemical for controlling scale and foam in seawater evaporators and fresh water generators. It is a concentrated polymer-based antiscalant and antifoulant designed for marine and industrial water systems. (rxsolgroup.com) (rx-sol.com)

Product Description:

RXSOL VAPTREAT is a neutral liquid treatment formulated with polyelectrolyte polymers and antifoaming agents to prevent scale formation and control foaming in seawater evaporators. It helps maintain clean heat transfer surfaces, improves evaporator efficiency, and ensures high-quality distilled water production. (rxmarine.com)

Key Benefits:

✔ Prevents scale formation in evaporators
✔ Controls foaming during distillation
✔ Improves distilled water quality
✔ Enhances heat transfer efficiency
✔ Reduces maintenance and downtime
✔ Suitable for both high and low-pressure evaporators

Applications:

  • Fresh Water Generators (FWG)

  • Seawater Evaporators

  • Marine Distillation Plants

  • Heat Exchangers

  • Industrial Water Systems

Dosage:

  • 10–20 MT/day output: 100–200 ml/day

  • 30–40 MT/day output: 300–400 ml/day

  • 50–60 MT/day output: 500–600 ml/day (rx-sol.com)

Note: for the gradual removal of existing scale deposits, at least twice the normal dose must be used. Remove deposits of more than 2mm, with Descalex Liqui

Need pricing or a bulk quotation?

Tell us your required product and quantity — our technical sales team replies promptly with pricing and availability.

Request a Quote

Related Products

Evaporator Treatment Chemicals ANTISCALANT 9209 RX Seawater Distillation Plants Antiscalant for Water Distillation Units , specially designed to control the development of scale in seawater distillation plants. View product →
Evaporator Treatment Chemicals Combotreat Pwd 7 Kg A well-balanced blend of several powder for boiler water treatment, resulting in a scale and corrosion control by one simple operation.Dry… View product →
Evaporator Treatment Chemicals Corroision Inhibitor for Oxygen Control 20 Ltr It is a corrosion inhibitor is a catalyzed liquid catatonic, filming amine corrosion inhibitor and oxygen scavenger , This formulation is… View product →
Evaporator Treatment Chemicals Corrosion Inhibitor Closed Cooling systems New Generation Corrosion Inhibitor blend for Metal protection inside the CLOSED circulating system View product →
Evaporator Treatment Chemicals Descalant Chemical Scales are damaging the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture ,… View product →
Evaporator Treatment Chemicals Hydrazine Hydrate it is used as an ANTIOXIDANT, an oxygen scavenger, and a corrosion inhibitor in water boilers and heating systems. Hydrazine is mainly used… View product →
Evaporator Treatment Chemicals RXSOL Altreat 400 RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does not adhere to… View product →
Evaporator Treatment Chemicals Scale Inhibitor with Antifoamer Treatment is used to reduce the concentration of scale forming compounds that can accumulate in production wells, water and disposal wells,… View product →